Niwala Yellow sandstone

A remarkable material due to its yellowish tone, as well as the sediments and fossils that it comprises.

Its natural origin is evidenced by the passage of organic remains on its surface, making the Niwala Yellow sandstone or Psammite so unique.

For that reason, this type of stonework provides several visual possibilities depending on the type of cut, by either enhancing its streaks (vein cutting) or otherwise blurring them (cross cutting).

Due to its resistance and porosity, Niwala Yellow sandstone can be used in diverse applications including swimming pools, indoor and outdoor cladding as well as ventilated façades.

FINISHES

APPLICATIONS

FORMATS

Finishes of the Niwala Yellow sandstone

The Niwala Yellow sandstone stands out for its versatility.

This can adapt its natural appearance in function of the project requirements, which is a great advantage for architects and designers. Pulycort has the following finishes available:

RAW: on this occasion, the surface of the Marbella limestone is presented to the cut, without any polishing and therefore, no shine.

POLISHED: through polishing, we achieve that the limestone has a greater luminosity and brightness.

HONED: this type of finish achieves a matte surface similar to the raw finish, except that in this case, the stone is subject to a first layer of polishing to remove saw marks. I.e., it’s the previous step before the last stage of polishing.

BRUSHED: this type of finish aims to provide the natural stone with a slightly coarse aspect lacking any shine, in order to reflect the passage of time upon the material.

BUSH HAMMERD: on the other hand, through the bushhammered limestone we achieve a uniform surface of the rugged character. This roughness gives the natural stone a greater grip, and therefore the possibility of being used in outdoor areas.

SANDBLASTED: the limestone is presented in a less coarse finish than that achieved by bush hammering so that the pits produced when treating the stone are less profound.

Book now your VIRTUAL VISIT to see our NIWALA YELLOW sandstone slabs and select those that you like the most.

APPLICATIONS

Polyvalent. The use that can be given to Niwala Yellow sandstone is diverse, both externally and internally. An example of this is its use in facades, swimming pools, pavements, and stairs.

INTERIOR PAVING

EXTERIOR PAVING

FACADES

STAIRS

LIVING ROOM

KITCHEN

BATHROOM

BEDROOM

FORMATS

In addition to Niwala Yellow sandstone elements (stairways, worktops and skirting boards etc.), Pulycort can also supply the standard forms of slab and tiles, such as 60 x 60, 60 x 30 or 60 x 40 cm. If your project requires special measurements, please consult us. Our production capacity is flexible and delivery dates are carefully controlled.